Destructive Testing

TENSILE TEST WITH FACILITIES FOR DETERMINING STRESS AT ELEVATED TEMPERATURE. AND YIELD STRESS AT SPECIFIED EXTENSION UNDER LOAD, USING EXTENSIOMETERS. FREE BEND, GUIDED BEND TESTS, COMPRESSION TEST, SHEAR TEST, IMPACT TEST LOAD, PROOF LOAD & BREAKING LOAD UP TO 60 T., TRANSVERSE TEST, CUPPING TEST, WRAPPING TEST etc.

Chemical Testing

BY SPECTROMETER & ALSO BY WET ANALYSIS

Salient Features

ANALYTICAL STUDY OF MICRO STRUCTURES, INTERGRANULAR CORROSION TESTS AS PER ASTM A262 (ALL PRACTICES), GALVANISING TEST & VARIOUS TESTS FOR BUILDING MATERIALS SUCH AS CLAY, CEMENT, SAND, AGGREGATE etc.

Non-Destructive Testing

  • RADIOGRAPHY (GAMA RAYS & X-RAYS)
  • ULTRASONIC
  • LIQUID PENETRATION
  • STRESS RELIEVING OF
  • PRODUCTION TEST COUPONS ETC.
  • MAGNETIC PARTICLE
  • UT THICKNESS
  • HARDNESS
  • VISUAL
  • POSITIVE MATERIAL IDENTIFICATION (PMI)

Building Material Testing

(A) CEMENT
1 Ordinary Portland Cement (OPC) Test
2 Portland Pozzolana Cement (PPC)
3 Slag/White Cement Chemical Test
(B) BRICKS& STONE
1 Clay Bricks
i Examination of size & general quality
ii Compressive strength of bricks
iii Water absorption
iv Efflorescence
2 Building Stone
i Compressive strength of bricks
ii Water absorption
iii Weathering test of natural building stone
iv Soundness
3 Kota Stone (Comp. Strength)
(C) CONCRETE
1 Ratio of cement in Mortar
2 ACC Block (Comp. Strength)
3 Kerb Stone (Comp. Strength)
4 Paver Block(Compressive Strength)
(D) DESIGN MIX
1 Design Mix
(E) STEEL & METALS
1 TMT Steel (Physical + Chemical)
2 TMT Steel (Physical)
3 TMT Steel (Chemical)
4 ISMB, 1SMC, Plate, Beam
5 ISMB, ISMC, Plate, Physical
6 ISMB, ISMC, Plate, Chemical
7 G.l Pipe (Physical + Chemical)
8 M.S. Pipe Complete Test
9 Bolt Screw & Stud
10 Chequred Plate
11 Aluminum Section Complete Test
12 Aluminum Product, Anodic Coating
13 Stainless Steel Sink
14 Stainless Steel, Complete Test
(F) TILES & MARBLES
1 Ceramic Glazed Tiles
2 Chequred/Terrazzo Tiles
3 Vitrified Tiles
(G) SAND/AGGREGATE
1 Grading/Flakiness Index/Elongation Index, Impact Value/Water Absorption/Specific Gravity,Silt Content, Bulking
2 Crushing Strength/10% fine Value/Abrasion Value/Organics Impurities
3 Sulphate, Chloride, Stripping Value
4 Complete Test
(H) SOIL
1 MDD &OMC
2 Plasticity Index
3 Liquid Limit
4 Plastic Limit
5 Grain Size Analysis
(I) WATER
1 Construction water
2 Drinking water
(J) NON-DESTRUCTIVE TESTING
1 Rebound Hammer Test
2 Ultrasonic Pulse Velocity Test
3 Concrete Core Cutting
4 Concrete Core Testing
(K) WOOD
1 Flush Door
2 Ply Wood
3 Pre laminated particle board
4 Gypsum Board
5 Veneered Particle Board
6 Block Board

List of Testing Facilities

  • Universal Testing Machines 60T capacity KRYSTAL ELMEC make; Annually Calibrated under Lloyds inspection.
  • Hardness Tester (FIE Make) HRB and HRC scales & poldi hardness kit.
  • Impact Testing Machine (FIE Make) capacity 300 joules calibrated as per ASME under Lloyde inspection, attached facility for conducting testing up to minus 196° C.
  • Profile Projector (National Instrument Calcutta Make) with magnification range 10X: 25X: 50X.
  • Ultrasonic Flaw Detector Models ESM 2MT, ECHO SCAN ED-1 & EX-10-All EEC Bombay Make with complete range of transducers and standard calibration blocks.
  • Ultrasonic thickness gauges (I) Modsonic & (II) EEC Make.
  • (i) Magnetic particle flaw detector ‘K-ELECTRONICS’ Model RF-3000. (ii) Magnaflux make magnetic Yoke-02 Nos. (iii) Permanent Magnet-01 Nos. with wet, dry and flourescent test arrangements.
  • Dye penetrant test-complete kit comprising of dye penetrant, flaw check developer and cleaner etc.,
  • Micro Examination :- Metallurgical Microscope with close circuit T.V. & Photographic arrangement, Accessories for finishing and etching reagents including electro etching for austenitic steels.
  • Fully equipped chemical laboratory for the wet analysis of all grades of ferrous and non-ferrous materials.
  • Multimatrix 36 channel Spectrometer ‘Polyvac-2000’ Fe, Cu, Zn & Al based.
  • Electric furnace with attached facilities for the time temperature recording for stress Relieving/normalizing/Annealing of test coupons.
  • Radiography camera Amershan make : Amertest ten 660, TECH/OPS 660 & AND REX 220 KVP (X-Ray machine), dark room with standard accessories.
  • Sieve Analyser for clay, cement, sand etc.

Make - Metoxex Finaland

Make - Oxford Instruments analytical

PERFECTION DOES’NT LIE IN DOING ORDINARY THINGS WELL BUT IN DOING ORDINARY THINGS EXTRAORDINARILY ENOUGH.